In Beaumont, metal roofing installation typically starts at $8 per square foot, while repairs begin at $450, but your actual price depends on roof size, material choice, and site conditions. We believe in transparent pricing so you can plan with confidence, and we are happy to walk you through the factors that affect your specific project.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Beaumont and the Golden Triangle: panel systems engineered for Gulf Coast hurricane wind, humidity and heat, installed over high-temperature synthetic underlayment with proper ventilation, corrosion-resistant fasteners and manufacturer-specified details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Beaumont homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to work loose as Gulf heat expands and contracts the roof every day. Strong wind uplift resistance for hurricane season and a cool reflective finish for long summers. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of hurricane-battered, sun-baked or end-of-life shingle and metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Many Gulf Coast insurers offer discounts for impact-rated or wind-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles: no tear-off, less waste, lower cost. Popular on Beaumont ranches and cottages. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing wind-bent or punctured panels, resealing seams and penetrations, and fixing failed flashing before a tropical downpour becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and wall transitions) and fixed right, not just caulked over. Emergency tarping available after hurricanes and severe storms. |
| Screw Replacement & Re-Fastening | From $750 | Beaumont's heat, humidity and salt-tinged air flex and corrode metal roofs, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized corrosion-resistant screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for homes, carports, barns and workshops across Jefferson, Hardin and Orange counties. Quality coated panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Beaumont homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for hurricane season. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent hail and wind performance, Class A fire rating, and profiles that mimic the shake and tile looks found on Beaumont's Colonial Revival and Craftsman homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and stand up to Gulf humidity for decades. Custom fabrication for the fine details of oil-boom-era homes. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and brick transitions, the number one leak point on older Beaumont roofs. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow is essentially unknown in Beaumont, so what Gulf Coast metal roofs need instead is uplift protection: extra ridge and eave fastening, reinforced ridge caps, heavy edge metal and hurricane-rated clips for tropical-storm winds, plus reflective heat-control options for the long summer. Honest guidance on what yours needs. |
| Storm & Wind Damage Repair | Free inspection | Repair of hurricane, tropical-storm, wind and hail damage to metal roofing: thorough documentation with photos, an honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating, salt-air corrosion and UV wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden tropical downpours away from foundations on swelling clay soil, with details that handle pine needles and oak debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across Jefferson, Hardin and Orange counties, from rice-field farm buildings to Port Neches and Nederland shops, with durable coated panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs and those with multiple slopes, valleys, or penetrations require more materials and labor, increasing the overall cost.
- Material type and gauge : Standing seam, corrugated panels, stone-coated steel, and copper each have different price points, with thicker gauges and specialty metals costing more.
- Accessibility and roof height : Steep roofs, multi-story homes, or properties with limited access may require additional safety measures and equipment, adding to the labor cost.
- Condition of existing roof : If removal of old roofing or repairs to the decking are needed, this adds to the project cost. Retrofit over shingles can be more affordable.
What's included
- Travel included across the Beaumont area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage and details about its current condition ready before you call. Our estimates include a thorough inspection, material and labor costs, and a clear breakdown of what is covered, with no hidden fees. Call (409) 245-5745 to schedule your free estimate and discuss your project.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on the material (e.g., corrugated steel vs. copper), roof complexity, home height, and whether removal of the old roof is required. For example, corrugated panel roofing starts at $5.50 per square foot, while copper starts at $20 per square foot. We provide a detailed estimate so you understand exactly what you are paying for.
Do you offer free estimates?
Yes, we offer free estimates for metal roof inspections and storm damage assessments. Call (409) 245-5745 to schedule your appointment at a convenient time.
What payment methods do you accept?
We accept cash, checks, and major credit cards. For larger projects, we can discuss payment schedules and financing options to fit your budget.