Serving the Beaumont area  ·  (409) 245-5745  ·  Open Mon-Sun 7am-7pm
📞 (409) 245-5745 Free Quote

Metal Roofing in Vidor, TX (77662) · Local Professionals

Beaumont Metal Roofing · Fast response in Vidor and the Beaumont area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+239Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Vidor sits right on the edge of the Big Thicket, where the pines close in and the lots get a little wider, and a lot of the homes along Main Street and down toward the old sawmill neighborhoods are still carrying the same shingle roofs they had when Lyndon B. Johnson was president. If you live east of I-10 or off Highway 105 near Vidor High School, you already know the routine: another spring storm, another batch of shingles in the yard, another call to a roofer who never shows.

We are Beaumont Metal Roofing, and we work Vidor and ZIP 77662 every week. We know the older frame houses on raised piers, the brick ranches tucked under the pine canopy off Tram Road, and the mobile-home lots that catch every bit of wind coming across the flat ground. When you call (409) 245-5745, you get a local crew that can look at your roof and tell you straight whether a repair will hold or if it is time to go metal.

Metal Roofing in Vidor (77662)

Vidor is flat Gulf Coastal Plain ground, and that matters more than people think. Water does not run off fast here, so on the older homes with low-pitch roofs and shallow eaves, a bad flashing detail or a clogged valley can back water under the panels and into the attic before you see a stain on the ceiling. The heavy pine cover is the other big factor. Loblolly needles and oak leaves pile up in valleys and behind chimneys, hold moisture, and speed up corrosion on fasteners. We see a lot of failed screws and lifted seams on roofs that were installed a decade ago without the right underlayment or without accounting for the tree debris. Our team walks every Vidor roof with that in mind, checking the decking, the fastener pattern, and the way water actually leaves the roof, not just the way it looks from the street.

We have been serving Vidor and the Beaumont area long enough to know which streets flood, which lots are tight for a delivery truck, and which older homes still have the original 1x6 skip sheathing under the shingles. That kind of detail changes how we plan a metal roof over or a full tear-off, and it is why we give a free inspection before we quote a number.

Our services in Vidor

How a Job Works in Vidor

Step 1: You call (409) 245-5745 or send a message, and we set up a free on-site assessment. We get on the roof, check the attic if we can, look at the flashing, the valleys, and the fasteners, and take photos. Then we sit down with you and explain what we found, what a repair would cost, and what a full metal roof replacement would run. No pressure, no sales pitch.

Step 2: Once you approve the scope, we pull the permit with the City of Vidor and schedule the work. On the older neighborhoods off Main Street, access can be tight, so we plan where the dumpster and the material go before the crew shows up. We protect the landscaping, tear off or prep the existing roof, and install the new metal system. If your home is in an HOA or a historic overlay, we help you get the color and profile approved before we order material.

Step 3: We clean up every day, and when the job is done we do a final walkthrough with you. We magnet-sweep the yard for nails, haul off all debris, and make sure you know how the roof drains, how the fasteners work, and what to check after a big storm. We leave your property clean and your roof ready for the next hurricane season.

Pricing in Vidor depends on the size and pitch of your roof, how many layers are already there, and how much decking repair is needed. For a typical single-story ranch, metal roof installation starts around $8 per square foot, and standing seam runs about $10 per square foot. A metal roof over existing shingles (retrofit) starts near $7 per square foot and can save you the cost of a tear-off. If you just need a repair, metal roof repair and leak repair start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel and metal shingle systems start around $9 per square foot, and copper or specialty metal starts at $20 per square foot. We always give you a written estimate after the free inspection, so you know exactly what you are paying for. Call (409) 245-5745 to set it up.

My house off Tram Road is under heavy pine trees and the old shingles are always stained. Will a metal roof help with the pine needles and sap?
Yes, and it is one of the main reasons folks in Vidor switch. Pine needles and sap sit on asphalt shingles, hold moisture, and grow algae and moss. A metal roof sheds them faster, and we can install a smooth panel profile that makes it easy to blow or sweep the debris off. We also check the valleys and behind the chimney, where needles pile up and cause leaks.
How fast can you get out to Vidor after a storm knocks a limb through the roof?
We prioritize active leaks and storm damage in Vidor and the surrounding area. Call (409) 245-5745 and we will get an inspector out as soon as possible, often the same day or the next morning. We can tarp the roof to stop the water, then give you a written repair estimate.
What is the ballpark cost for a metal roof replacement on a 1,500 square foot house in Vidor?
For a typical 1,500 square foot single-story home in 77662, a metal roof replacement usually starts around $9 per square foot for the roofing material and labor, so you are looking at roughly $13,500 and up depending on pitch, decking condition, and whether we tear off the old shingles. Standing seam and stone-coated steel run higher. We give you an exact number after the free inspection.
Do I need a permit from the City of Vidor to replace my roof?
In most cases, yes, a permit is required for a full roof replacement or re-roof in Vidor. The city checks things like the number of existing shingle layers and the type of underlayment. We handle the permit application and inspection scheduling for you, and we make sure the job meets the current code before we start.
My neighbor and I are not sure where the property line is, and my new metal roof will overhang his side. What do we do?
Before we order material, we recommend you have a survey done or check your plat to confirm the property line. We build the roof to your existing structure, but we cannot move a property line. If you are in an HOA, we also help you get the color and panel profile approved so there are no surprises after installation.
Are you insured for work on my Vidor property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What should I do to get my metal roof ready for hurricane season in Vidor?
Late spring is the time to act. We recommend a free inspection to check the fasteners, the sealant around flashing and vents, and the gutters. Pine debris and grit build up on the roof and in the valleys, so clearing that off before the storms hit helps. If you have an older metal roof, we can replace the screws and re-seal the penetrations before the first tropical system comes into the Gulf.
Why choose us?

Trusted professionals in Beaumont

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Beaumont

All your work handled by qualified professionals in Beaumont

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

239+ Verified Client Reviews in Beaumont

⭐⭐⭐⭐⭐ 4.9/5 · 239 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Beaumont · Response within 24h · No commitment · ☎ (409) 245-5745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Beaumont ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm