Licensed & Insured, in Beaumont and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Beaumont
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (409) 245-5745 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Beaumont and surrounding areas · On-site visits included · Free estimate within 24h
Beaumont Metal Roofing is a team of local certified professionals based in Beaumont. We respond quickly in Beaumont and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (409) 245-5745⭐⭐⭐⭐⭐ 4.9/5 · 239 verified Google reviews
“Needed a metal roof put on our equipment hangar out in the rural part of the county and these guys handled the whole thing. The 40x60 building went up with corrugated panels and the crew of four knocked it out in about three days. Straightforward, no drama, and the price matched the quote.”
Commercial Metal Roofing
“We had the copper roofing over our front porch redone and I was honestly nervous about finding someone who wouldn't butcher it. The crew took their time with the seams and the flashing around the columns, and the patina already looks incredible. Worth every penny.”
Copper & Specialty Metal Roofing
“Our old barn roof was rusting through and we needed it replaced before hay season. Beaumont Metal Roofing put up new ribbed panels on the whole thing and even re-fastened some of the purlins that had worked loose. Solid work and they cleaned up all the old screws and scrap without me asking.”
Commercial & Agricultural Metal Roofing
“Had a standing seam roof installed on our brick house and it completely changed the look of the place. The crew was on site for about a week and a half, and the foreman walked me through the flashing details around the chimney before they started. Only gripe is they showed up a day later than scheduled, but the finished roof is flawless.”
Standing Seam Metal Roofing
“We had a leak that only showed up during heavy rain and two other companies couldn't find it. These guys traced it to a bad flashing detail near the skylight, sealed it up, and replaced a handful of backed-out screws while they were at it. Two storms later and it's bone dry.”
Metal Roof Leak Repair
“Brand new metal roof on our brick ranch house and I couldn't be happier. They tore off the old shingles, checked the decking, and had the new panels on in four days. The house is noticeably cooler upstairs now that summer's here.”
Metal Roof Installation
“Went with the retrofit over our existing shingles to save some money and I'm glad we did. The crew laid down the underlayment and ran the panels right over the top, and you'd never know there were shingles underneath. They were in and out in two days with barely any mess.”
Metal Roof Over Shingles (Retrofit)
“Replaced the metal roof on our house in the brick subdivision after the last round of storms beat it up. They matched the panel profile to what was already there so it blends with the neighbors, and the crew of five finished the whole thing in under a week. Communication could've been a little better mid-project, but the roof itself is top notch.”
Metal Roof ReplacementReal photos of our work in Beaumont · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener corrugated or ribbed panel roof | Starting at $8/sq ft | Includes tear-off of one layer, synthetic underlayment, screw-down panels and basic trim; roof pitch and access move the price. |
| Standing seam metal roof | Starting at $12/sq ft | Includes concealed clips, seamed panels, custom flashing and ridge; roof complexity and panel gauge drive the final number. |
| Metal shingle or stone-coated steel roof | Starting at $11/sq ft | Includes stamped or coated panels, underlayment and trim; historic-district or HOA design review can add time and limit color choices. |
| Metal roof over existing shingles (retrofit) | Starting at $7/sq ft | Includes framing adjustments, underlayment and panels over one existing layer; code limits on existing layers must be verified first. |
| Complex or large-scale job | On estimate | Steep, cut-up roofs with dormers, multiple valleys or chimney rebuilds need an on-site look before a number is given. |
| Travel | Included | In Beaumont and surrounding Golden Triangle cities, with no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, standard pitch | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard flashing on an accessible single-story roof. |
| Mechanically seamed, high wind exposure | Starting at $13/sq ft | Double-locked seams and upgraded clip spacing for exposed roofs near the ship channel. |
| Strip and re-roof with deck repair | Starting at $14/sq ft | Old shingles removed, soft sheathing replaced, new underlayment and panels installed. |
| Complex roof with hips and valleys | On estimate | Multiple planes, chimney and skylight penetrations, and porch tie-ins need an on-site measure before pricing. |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Tear-off, deck check, underlayment, corrugated or ribbed panels, and haul-away included. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners, premium underlayment, and custom trim; pitch and roof complexity move the number. |
| Stone-coated steel or metal shingle replacement | Starting at $13/sq ft | Includes tear-off, deck repair allowance, and profile-matched trim; historic district review can add time. |
| Complex or large-scale replacement | On estimate | Steep pitches, multiple dormers, chimneys, and heavy deck repair need an on-site look first. |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one shingle layer, simple gable | Starting at $7/sq ft | Includes underlayment, standard flashing, and cleanup on an accessible single-story roof. |
| Retrofit with battens or purlins | Starting at $9/sq ft | Adds a level plane and air gap for low-slope or wavy decks before panels go down. |
| Stone-coated steel or metal shingle recover | Starting at $11/sq ft | Premium profile and color options for HOA or historic district requirements. |
| Deck repair or partial tear-off | On estimate | Priced after we open the roof and confirm the extent of rot or storm damage. |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-area repair (screw line, small flashing reseal, one panel) | Starting at $450 | Covers one failed area, basic sealant and fasteners, plus a roof walk and photo report |
| Multi-panel storm repair | Starting at $850 | Covers several bent or punctured panels, new fasteners, and sealant at the affected laps |
| Flashing, chimney, or skylight repair | Starting at $650 | Covers rebuilding the flashing and resealing the penetration, with height and pitch moving the price |
| Deck and underlayment repair | On estimate | Needs an on-site look because the scope depends on how much decking the leak has rotted |
| Travel | Included | in Beaumont and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak point repair | Starting at $450 | Includes diagnosis, water test and repair of one failed fastener, boot or small flashing gap. |
| Multiple leak points or flashing rebuild | Starting at $750 | Includes several repairs in one visit; price rises with roof pitch, height and access difficulty. |
| Full re-fastening on exposed-fastener roof | On estimate | Priced per square after an on-site count of failed screws and panel condition. |
| Emergency tarping after storm | Starting at $350 | Includes temporary weatherproofing; credited toward the permanent repair when booked together. |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening | Starting at $750 | Covers a standard single-story exposed-fastener roof with a normal count of failed screws, new UV-resistant washers and debris clearing; roof size and pitch move the price. |
| Full screw-out and re-set | Starting at $1,450 | Pulls every fastener on the roof, inspects each hole and deck spot, and sets new oversized corrosion-resistant screws; fastener count and roof height drive the number. |
| Oversized fastener upgrade | Starting at $1,100 | Steps up to larger diameter screws where hurricane wind stripped the original holes; panel condition and how many holes wallowed out set the scope. |
| Deck repair under the panel | On estimate | Needs an on-site look because we have to lift panels and see how much sheathing is soft before we can price the carpentry and re-set. |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard panel roof installation | Starting at $5.50/sq ft | Panels, underlayment, fasteners, standard trim and labor on an accessible roof |
| Re-fastening and screw replacement | Starting at $450 | Replacing rusted or backed-out screws and dried washers on an existing panel roof |
| Over-shingle retrofit | On estimate | Code limits on existing shingle layers and deck condition must be checked on site |
| Barn, carport or workshop panel roof | On estimate | Span, height, access and trim package vary widely on rural Hardin County structures |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement (tear-off) | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment and standard flashing; pitch and complexity move the price |
| Metal shingle roof installation on new deck | Starting at $8/sq ft | Includes underlayment, panels and standard flashing when the deck is already sound |
| Retrofit over existing shingles | Starting at $7/sq ft | Includes prep and panels where code allows; number of existing layers limits eligibility |
| Stone-coated steel shingle upgrade | Starting at $12/sq ft | Includes granule-coated steel panels and matching trim; heavier texture and hail resistance |
| Complex or steep-slope job | On estimate | Multiple valleys, dormers, chimneys or historic review require an on-site look before pricing |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation | Starting at $9/sq ft | Includes tear-off of one shingle layer, underlayment, panels, and standard flashing; steep pitch or extra layers raise the rate |
| Retrofit over existing shingles | Starting at $7/sq ft | Includes purlin or spacer system and panels over one sound shingle layer, subject to local code layer limits |
| Stone-coated steel roof repair | Starting at $450 | Includes leak diagnosis, fastener replacement, and resealing flashing at penetrations; panel replacement quoted separately |
| Complex or large-scale job | On estimate | Steep two-story roofs, multiple chimneys, historic district review, or deck repair need an on-site look before pricing |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and porch roof | Starting at $20/sq ft | Includes custom fabrication and soldered flashing for bay windows, porch roofs and dormers. |
| Full copper or zinc architectural roof | Starting at $28/sq ft | Includes standing seam or flat-lock panels, underlayment and full flashing detail. |
| Custom flashing and trim | Starting at $650 | Formed and soldered copper at chimneys, walls and valleys, priced by the number of penetrations. |
| Complex or historic home project | On estimate | Steep pitches, multiple planes and historic profiles need an on-site look before pricing. |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective acrylic coating | Starting at $2.50/sq ft | Includes wash, spot prime and two coats on sound low-rise panels. |
| Silicone or urethane system | Starting at $3.25/sq ft | Thicker film for minor rust and low-pitch panels; pitch and rust depth raise it. |
| Rust treatment and fastener rework | Starting at $1.50/sq ft | Rust conversion, primer and washer replacement priced by fastener count. |
| Full restoration system | On estimate | Heavy chalking, deep rust and steep access need an on-site look first. |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration flashing repair | Starting at $600 | Includes inspection, new bent flashing, and water test on one vent pipe or wall transition. |
| Chimney flashing and cricket rebuild | Starting at $950 | Covers new pan and step flashing; price rises with chimney width, height, and roof pitch. |
| Skylight curb and flashing rebuild | Starting at $1,200 | Includes new curb flashing and back pan; multiple skylights or rotted decking add cost. |
| Complex or large-scale job | On estimate | Multiple penetrations, steep access, or rotted sheathing need an on-site look before pricing. |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Perimeter re-fastening and edge metal check | Starting at $1,200 | Covers single-story perimeter re-fastening, ridge cap inspection, and fastener upgrades on a straightforward roof |
| Ridge cap and clip upgrade | Starting at $1,650 | Includes reinforced ridge caps and hurricane-rated clips; price moves with roof size and panel profile |
| Full uplift protection package | Starting at $2,400 | Adds heavy edge metal, full perimeter fastening, and reflective finish options on larger or two-story roofs |
| Complex or steep-slope job | On estimate | Steep pitch, multiple levels, or corroded trim needs an on-site look before we quote a number |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic walk with photos, written repair-versus-replace assessment, no obligation |
| Minor repair (screws, flashing, sealant) | Starting at $350 | Covers backed-out screws, small flashing repairs, and re-sealing; access and roof pitch move the price |
| Panel and seam repair | Starting at $750 | Includes panel re-seating or replacement and seam re-closing; number of panels and height affect cost |
| Section replacement | On estimate | Widespread damage or compromised underlayment needs an on-site look before a number is given |
| Insurance documentation | Included | Before-and-after photos and a written scope for your adjuster, provided with any repair |
| Travel | Included | In Beaumont and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Full walk-over with fastener, seam and flashing check, photos included, price confirmed before the visit |
| Leak-focused inspection | Starting at $150 | Targeted water testing and flashing review at the reported leak, priced by access and roof pitch |
| Insurance or real-estate report | Starting at $250 | Documented condition report with photos and remaining-life estimate for claims or closings |
| Commercial and agricultural review | On estimate | Large-plane fastener and panel audit, scoped on site because roof size and access vary widely |
| Travel | Included | in Beaumont and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (409) 245-5745, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard color | Starting at $9/linear ft | Includes on-site fabrication, hangers, end caps, and basic outlets; run length and roof height move the price. |
| Seamless steel or half-round profile | Starting at $14/linear ft | Heavier gauge and traditional profile for older homes; fascia condition and hanger style affect the final rate. |
| Downspouts and debris guards | Starting at $6/linear ft | Priced per run and per outlet; pine and oak debris load determines the guard type and spacing. |
| Standing seam clamp hanger upgrade | On estimate | Needs an on-site look at the seam profile and spacing before we quote the hanger count. |
| Old gutter removal and disposal | On estimate | Depends on run length, number of stories, and whether the old system is screwed, nailed, or hidden. |
| Travel | Included | in Beaumont and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair or re-fastening | Free estimate | Covers failed screws, washers, and minor flashing; final price depends on panel count and roof access. |
| Ribbed panel replacement | Starting at $3.50 per sq ft | Includes tear-off, new coated panels, trim, and fasteners; heavier gauge and insulation raise the rate. |
| Standing seam installation | Starting at $6.50 per sq ft | Concealed fasteners and custom trim; price rises with roof height, pitch, and penetration count. |
| Insulated panel system | On estimate | Requires an on-site look at purlin spacing, condensation risk, and how the building is used. |
| Travel | Included | in Beaumont and surrounding Jefferson, Hardin, and Orange county areas, no separate call-out fee. |
| Estimate | Free | Response within 24 hours at (409) 245-5745, no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Beaumont need a crew that understands this Gulf Coastal Plain climate and the housing stock that sits on it. Beaumont Metal Roofing is your local source for metal roof installation, replacement, re-roofs, and repair on the older oil-boom Victorians and Craftsmans near Calder Avenue, the low-pitched ranches of Westgate and South Park, and the newer subdivision homes out toward Lumberton and Dowlen Road. We also serve Port Arthur, Nederland, Port Neches, and Groves.
This is not mountain country, and we do not pretend otherwise. Your roof fights hurricane and tropical-storm wind, salt-laden humid air, intense summer sun, and afternoon thunderstorms with straight-line gusts. Under the pines and live oaks, debris piles up and fasteners on aging screw-down roofs back out. Our network of licensed, insured local contractors handles it all. Start with a free estimate and straight guidance on what your roof actually needs.
Most metal roof leaks in Beaumont trace back to a few predictable failures. The number one cause on 15 to 30 year old exposed-fastener roofs is fastener back-out: the EPDM sealing washer under each screw dries, shrinks, and cracks in the heat and sun, and water slips past. Seams separate as panels expand and contract with thermal movement. Pipe boots and flashing fail at chimneys, skylights, and valleys, where sealant ages out and gaps open. Wind lifts and peels panels after a storm, and fallen pine and oak limbs puncture the metal outright.
Ignoring a small leak is how a cheap fix becomes a deck replacement. Water tracks along purlins and decking far from the entry point, so the stain on your ceiling may sit ten feet from the actual gap. By the time it shows, sheathing can be rotted and insulation soaked. Our metal roof leak repair team finds the true source, not just the wet spot.
The honest call is not always replacement. On many aging screw-down roofs, a full screw replacement and re-fastening with new sealing washers restores a watertight roof for a fraction of replacement cost. When panels, seams, or decking are too far gone, we say so plainly. Call (409) 245-5745 or request a free estimate and we will tell you which side of that line your roof is on.
We install the full range of metal systems and match the roof to the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and no exposed screws, which makes it the premium, low-maintenance choice for the two-story homes along Dowlen Road and Lumberton. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, carports, and workshops out in Hardin and Jefferson counties. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more upfront but has no exposed screws to service, while screw-down costs less and needs its fasteners checked and replaced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound; when it is not, tear-off is the right call. We will tell you which applies to your home.
Metal roof pricing in Beaumont is usually quoted per square foot for installations, while repairs are often flat-rate. What moves the number: the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Typical ranges exist, but final pricing depends on the roof and site conditions, so we quote after we see the roof. Some carriers may offer premium discounts for metal or impact-rated roofs; that is between you and your insurer, not a promise we make.
See our pricing page for a plain-English overview, then request a free estimate or free roof inspection. We will give you a written number and an honest repair-versus-replace recommendation.
After a storm, we inspect and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent. Coverage decisions rest with your carrier, and we make no promise a claim will be approved. We never suggest a deductible can be waived, absorbed, or paid by the contractor, and we do not offer "free roof" framing. If repair is the honest answer, we will say so.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements, fees, and inspection thresholds vary by city. Historic district or HOA design review can also restrict panel profile and color. Requirements vary, always verify with the Beaumont building or planning department before starting your project. For documentation or a free estimate, contact us.
Ready to get started? Beaumont Metal Roofing serves in Beaumont and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Beaumont · Response within 24h · No commitment · ☎ (409) 245-5745
Your Free Quote Request