Serving the Beaumont area  ·  (409) 245-5745  ·  Open Mon-Sun 7am-7pm
📞 (409) 245-5745 Free Quote

Metal Roofing in Nederland, TX (77627) · Local Professionals

Beaumont Metal Roofing · Fast response in Nederland and the Beaumont area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+239Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Nederland is the kind of town where brick ranches from the 1950s through the 1980s sit under tall pines, and the shingle roofs on those homes have taken decades of Gulf humidity and storm wind. If you live near Nederland High School or off Nederland Avenue, you already know the look: low-pitched roofs, mature trees, and gutters that fill up with pine straw every season.

That is exactly the housing stock we work on every week. Beaumont Metal Roofing helps homeowners in Nederland (77627) move from aging shingles to metal that handles heat, wind, and pine debris without constant patching. We are based in Beaumont and serve Nederland and the surrounding Golden Triangle, including Port Neches and Groves.

Metal Roofing in Nederland (77627)

Nederland sits on the flat Gulf Coastal Plain, and the ground here is heavy clay that swells after rain and shrinks in dry spells. That movement shows up at flashing points, chimney edges, and where additions meet the original roofline. Most of the homes we see are single-story brick ranches and cottages with low-slope roofs, often shaded by loblolly pines and live oaks. The tree cover is nice until a limb drops or pine needles pack the valleys. We pay close attention to decking condition and fastener placement because a metal roof is only as good as what holds it down.

Our team has installed, repaired, and replaced metal roofs across Nederland and the Beaumont area for years. We know which neighborhoods have tighter lot access, where dumpster placement gets tricky, and how to stage materials without tearing up your lawn. Whether you are on a quiet street near the high school or closer to the shops on Nederland Avenue, we plan the job around your property, not the other way around.

Our services in Nederland

How a Job Works in Nederland

Step 1: You call (409) 245-5745 or request a free estimate online. We schedule an on-site assessment at your Nederland property, look at the roof, attic, flashing, and gutters, and talk through options like a metal roof over shingles or a full tear-off. You get a clear written scope before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department and coordinate any HOA or historic review if it applies. On install day, we protect landscaping, set up safe access, and keep the site organized. For tighter lots in older Nederland neighborhoods, we plan material drops and staging carefully so neighbors are not blocked and your driveway stays usable.

Step 3: When the work is done, we clean up thoroughly, haul away debris, and walk the roof and gutters with you. We do not leave until you have seen the finished job and know how to reach us if anything comes up later.

Pricing in Nederland depends on roof size, pitch, access, and the condition of the existing decking. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles retrofit at $7. Repairs start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Gutters for metal roofs start at $9 per linear foot. If you want a real number for your home, call (409) 245-5745 for a free estimate. We will walk the roof, measure, and explain what is driving the cost so you can compare apples to apples.

My 1970s brick ranch near Nederland High School has two layers of shingles. Can you install metal over them?
Sometimes, yes, but it depends on the condition of the decking and local code limits on existing layers. We inspect the roof and attic first, then tell you honestly whether a retrofit makes sense or whether a tear-off is the safer long-term call.
A storm just peeled back panels on my carport and water is coming into the house. How fast can you respond in Nederland?
We prioritize active leaks and storm damage. Call (409) 245-5745, describe what you are seeing, and we will schedule the soonest available inspection. We can often tarp or make temporary repairs to stop further damage while we put together a permanent fix.
What does a typical metal roof cost for a 1,500 square foot ranch in Nederland?
For a home that size, most installations fall in the range of $12,000 to $20,000 depending on the panel type, roof complexity, and whether we tear off the old shingles. Standing seam and stone-coated steel sit at the higher end. We give you a written estimate after seeing the roof, not a phone guess.
Do I need a permit to replace my roof in Nederland, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and requirements can vary by jurisdiction. We confirm the current rules with the local building department before work begins and handle the permit process for you. If your home is in a historic district or HOA, we also help coordinate any design review.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What should I do?
Overhangs and drainage can affect a neighbor, so it is worth a conversation before work starts. We can review the property line and gutter discharge with you, and if your HOA has rules about roof color or panel profile, we help you get approval before ordering materials.
Are you fully insured for work on my Nederland property?
Yes. We carry general liability insurance and workers' compensation coverage. If you would like proof of coverage before we start, just ask and we will provide it.
What maintenance does a metal roof need in Nederland with all these pines?
Pine straw and leaf debris are the main issue. Keep gutters and valleys clear, especially before hurricane season, and have the roof inspected every couple of years for loose fasteners or lifted panels. A quick inspection after major storms can catch small problems before they become leaks.
Why choose us?

Trusted professionals in Beaumont

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Beaumont

All your work handled by qualified professionals in Beaumont

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

239+ Verified Client Reviews in Beaumont

⭐⭐⭐⭐⭐ 4.9/5 · 239 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Beaumont · Response within 24h · No commitment · ☎ (409) 245-5745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Beaumont ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm