Serving the Beaumont area  ·  (409) 245-5745  ·  Open Mon-Sun 7am-7pm
📞 (409) 245-5745 Free Quote

Metal Roofing in Beaumont, TX (77701) · Local Professionals

Beaumont Metal Roofing · Fast response in Beaumont and the Beaumont area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+239Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Beaumont's older neighborhoods tell the story of the oil boom in their rooflines: deep porches and hipped roofs on Calder Avenue, low-slung brick ranches across Westgate and South Park, and newer two-story homes out along Dowlen Road. Under all those tall pines and live oaks, the same problems keep showing up: wind-lifted panels, rusted fasteners, and leaks that start small and spread fast.

We are Beaumont Metal Roofing, and we work these streets every week. From the Craftsman homes near the Neches River to the metal barns out in Hardin County, we know how Gulf humidity, hurricane wind, and pine debris treat a roof here. If you are in 77701 or anywhere around Beaumont, call (409) 245-5745 and we will take a look.

Metal Roofing in Beaumont (77701)

Beaumont sits on flat Gulf Coastal Plain ground along the Neches River, and that heavy clay soil swells and shrinks with every wet and dry spell. On the older blocks, that movement shows up as out-of-square roof lines and flashing that pulls away from chimneys and walls. The tree canopy is the other big factor. Loblolly pines and live oaks drop limbs and needles year round, and in a straight-line wind or a tropical system, debris turns into punctures and lifted panels. After a few hurricane seasons, more homeowners in the Golden Triangle are moving to standing seam and stone-coated steel, but we also repair plenty of corrugated panel roofs on carports, workshops, and barns out toward the rice fields.

Our team has worked on everything from 1920s Craftsman bungalows to 2020s subdivision homes, so we can match the right profile and color to your house instead of forcing a one-size-fits-all panel onto it.

Our services in Beaumont

How a Job Works in Beaumont

Step 1: You call (409) 245-5745 or request a free estimate, and we set up an on-site assessment. We get on the roof, check the fasteners, seams, and flashing, and look at the attic side where we can. You get a written scope with photos and a clear price before any work starts.

Step 2: We schedule the work and handle the permit steps with the City of Beaumont. On tight lots in the older central blocks, we plan panel staging and dumpster placement so we are not blocking your driveway or your neighbor's. If your home is in a historic district or under an HOA, we help you get the profile and color approved before we order material.

Step 3: When the job is done, we magnet-sweep for screws and nails, haul off all debris, and walk the roof and gutters with you. We do not leave until you have seen the finished work and know what to expect going forward.

Pricing in Beaumont depends on roof size, pitch, access, and how much repair the deck and flashing need. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation around $8, standing seam around $10, and metal roof replacement around $9. A retrofit over existing shingles starts around $7 per square foot, subject to the layer limits in your local code. Smaller jobs are priced flat: metal roof repair and leak repair start around $450, screw replacement and re-fastening around $750, and flashing, chimney, or skylight repair around $600. Storm and wind damage inspections are free, and we document what we find so you can file your insurance claim. Call (409) 245-5745 for a free estimate on your specific roof.

My 1950s ranch in South Park has a low-pitch roof. Can it take standing seam metal?
Low-slope roofs are common in South Park and Westgate, and they can work with metal, but the panel profile and seam details have to be right for the pitch. We check the slope and the deck condition first, then recommend either standing seam with the correct underlayment or a ribbed panel where the pitch is tighter. We will tell you honestly if a different system fits better.
A storm just peeled back panels on my roof near Dowlen Road. How fast can you get out?
We prioritize active leaks and storm damage in Beaumont. Call (409) 245-5745 and describe what you are seeing. We will schedule an inspection, and if the roof is open to the weather we can often tarp or make temporary repairs the same day or the next, then give you a written repair or replacement estimate.
What does a typical metal roof replacement cost in Beaumont?
Most full replacements in Beaumont land between the mid thousands and low five figures depending on square footage, panel type, and how much decking and flashing repair is needed. Standing seam and stone-coated steel run higher than corrugated panels. We give you a line-item estimate after the free inspection so you can see exactly where the money goes.
Do I need a permit to re-roof my house in Beaumont?
A full replacement or re-roof usually requires a permit, and the rules and inspection steps can vary by jurisdiction. We pull the permit and coordinate inspections as part of the job. For the current requirements, check the City of Beaumont website or call the building department before you start, and we are glad to walk you through what applies to your address.
My neighbor says my new metal roof panels overhang the property line. What do I do?
Start by checking your survey and plat so you know where the line actually sits. Most overhangs are within the allowed setback, but if there is a real encroachment, we adjust the panel layout or trim before the job is finalized. If your neighborhood has an HOA, we also submit the profile and color for approval so you are not dealing with a violation later.
Are you insured for work on my Beaumont property?
Yes. We are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Beaumont's humidity and pine debris?
Plan on a yearly inspection, ideally in late spring before hurricane season. Clear pine needles and leaves from valleys and gutters, check fasteners and sealant at penetrations, and touch up any scratches before rust starts. The humid air and afternoon storms here are hard on sealants, so catching small issues early is what keeps a metal roof lasting decades.
Why choose us?

Trusted professionals in Beaumont

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Beaumont

All your work handled by qualified professionals in Beaumont

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

239+ Verified Client Reviews in Beaumont

⭐⭐⭐⭐⭐ 4.9/5 · 239 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Beaumont · Response within 24h · No commitment · ☎ (409) 245-5745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Beaumont ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm