Serving the Beaumont area  ·  (409) 245-5745  ·  Open Mon-Sun 7am-7pm
📞 (409) 245-5745 Free Quote

Metal Roofing in Port Neches, TX (77651) · Local Professionals

Beaumont Metal Roofing · Fast response in Port Neches and the Beaumont area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+239Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Port Neches runs on river air, refinery schedules, and roofs that have to hold up through hurricane season. The 1970s and 80s brick homes off Nall Street and Port Neches Avenue sit on heavy clay that moves with every wet and dry spell, and the shingle roofs up there have taken enough wind and sun to make a metal roof the smart long game. We know the streets around the Riverfront Park and the older ranch houses near Port Neches-Groves High School, and we know what the weather does to them.

Homeowners in 77651 call Beaumont Metal Roofing because we show up, walk the roof, and tell you straight whether a repair will hold or a replacement makes more sense. Whether it is a wind-lifted panel on a shop off Grigsby Avenue or a full re-roof on a brick ranch near the high school, we handle the whole job, permits and all.

Metal Roofing in Port Neches (77651)

Port Neches sits on flat ground along the Neches River, and that flatness shows up in ways a roofer has to plan for. Heavy clay soil swells after a week of rain and shrinks in August, so roof edges, fascia, and gutter lines shift over time. Homes here are mostly 1970s to 1990s brick ranches and two-story traditional builds, many with low-slope sections over porches and garages that are prone to ponding and fastener back-out. Add salt-laden humid air from the ship channel, intense summer sun, and afternoon thunderstorms that push straight-line wind across the rooftops, and you get a lot of failed fasteners, separated seams, and flashing gaps. Pine and oak debris from the big trees around town collects in valleys and behind chimneys, holding moisture against the panels.

Our team has worked metal roofs across Port Neches and the Beaumont area for years. We know which neighborhoods have tight lot lines, where a lift can get in, and how to stage a tear-off without blocking a driveway on a narrow street. We also know the difference between a repair that buys you a season and one that actually solves the problem.

Our services in Port Neches

How a Job Works in Port Neches

Step 1: You call (409) 245-5745 or send us a message, and we set up a free on-site assessment. We walk the roof, check the decking, look at the flashing and penetrations, and talk through what you are seeing (stains on the ceiling, granules in the gutters, a panel that lifted in the last storm). You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required roofing permit with the city and schedule the crew. On a Port Neches job, that often means coordinating with tight driveway access and making sure material deliveries do not block the street. We protect landscaping, remove the old roof, and install the new metal system to spec. If your home is in a historic or HOA review area, we help you get the panel profile and color approved before we order material.

Step 3: We clean the site daily and do a final walkthrough with you. That means magnet-sweeping the yard for nails, hauling off all debris, and confirming the gutters and flashing are right. We leave your property clean and hand you the paperwork you need for your records or insurance.

Pricing in Port Neches depends on the size and pitch of the roof, how much decking needs repair, access, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Corrugated and ribbed panel roofing starts around $5.50 per square foot, and metal shingle or stone-coated steel both start around $9. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Coating and painting starts around $2.50 per square foot. These are starting figures, not a quote. Call (409) 245-5745 for a free estimate on your specific roof.

My 1970s brick ranch near Port Neches-Groves High School has a low-slope porch roof that ponds after heavy rain. Can metal roofing fix that?
Yes, but the fix is in the details. Low-slope sections need a standing seam panel or a mechanically seamed system with the right underlayment, and we often add taper to improve drainage before the panels go on. We check the decking and framing first, because ponding usually points to a slope or sag issue, not just the roof surface.
A storm just peeled back panels on my shop off Grigsby Avenue. How fast can you get out for storm damage?
We offer free storm and wind damage inspections and prioritize active leaks and open roofs. Call (409) 245-5745 and we will schedule an assessment as quickly as we can, often same or next day depending on volume after a storm. We document the damage for your insurance claim and can do temporary stabilization before permanent repairs.
What does a typical metal roof replacement cost for a 1,800 square foot home in Port Neches?
For a home that size, a metal roof replacement typically starts around $9 per square foot, so you are looking at roughly $16,000 and up depending on panel type, decking condition, and access. Standing seam runs higher, around $10 per square foot and up. We give you a firm written price after a free on-site assessment.
Do I need a permit to replace my roof in Port Neches, and who handles it?
A full replacement or re-roof commonly requires a permit, and the rules, fees, and inspection requirements are set by the local building department. We confirm the current requirements with the city before work starts and pull the permit as part of the job. We also check whether your home is in a historic district or HOA review area, since those can restrict panel profile and color.
My neighbor and I share a property line, and I want to make sure the new roof and gutters do not cross it. What should I do?
We stay within your property lines and set gutters and drip edges to direct water onto your own lot. If there is any question about the line, we ask you to confirm it before we order material. For HOA communities, we help you submit the panel profile and color for approval so there are no surprises after installation.
Is your crew covered by insurance if someone gets hurt on my Port Neches property?
Yes. We are fully insured with general liability and workers' compensation coverage. That protects you as the homeowner if there is an accident on the job.
What maintenance does a metal roof need in Port Neches to survive hurricane season?
The main things are keeping pine and oak debris out of valleys and behind chimneys, checking fasteners and seals once a year, and making sure gutters drain freely. After a named storm, a quick inspection catches lifted panels or loose screws before the next rain. We offer free roof inspections and can set up a simple annual check.
Why choose us?

Trusted professionals in Beaumont

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Beaumont

All your work handled by qualified professionals in Beaumont

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

239+ Verified Client Reviews in Beaumont

⭐⭐⭐⭐⭐ 4.9/5 · 239 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Beaumont · Response within 24h · No commitment · ☎ (409) 245-5745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Beaumont ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm