Serving the Beaumont area  ·  (409) 245-5745  ·  Open Mon-Sun 7am-7pm
📞 (409) 245-5745 Free Quote

Metal Roofing in Port Arthur, TX (77640) · Local Professionals

Beaumont Metal Roofing · Fast response in Port Arthur and the Beaumont area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+239Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Port Arthur is a city of deep-rooted neighborhoods where the salt air off the Sabine-Neches ship channel never takes a day off. From the historic bungalows and cottages near the old refinery blocks to the brick ranches off Gulfway Drive and the newer builds out toward the bypass, most roofs here are fighting wind, humidity, and sun year-round. If your shingles are curling, your panels are lifting, or you are tired of patching leaks every hurricane season, we are the local crew that knows exactly what this climate does to a roof.

Homeowners in the 77640 ZIP code call Beaumont Metal Roofing because we understand Port Arthur's specific mix of older housing stock and storm-battered roofs. We have worked on homes near the Bob Bowers Civic Center, along the seawall, and throughout the older blocks where pine straw and oak leaves pile up in valleys and against chimneys. We are fully insured, and we show up when we say we will.

Metal Roofing in Port Arthur (77640)

Port Arthur sits on flat, heavy clay soil that swells and shrinks with every wet and dry spell, which means roof lines shift and fasteners work loose over time. The older homes near the historic districts often have steep hipped roofs with deep porches, and access can be tight, especially where driveways are narrow and mature live oaks and magnolias hang low. Along the Gulfway Drive corridor and in the West Side neighborhoods, we regularly find 1940s to 1960s ranches with low-pitched roofs that are good candidates for a metal retrofit over the existing shingles, provided the deck is sound and the code allows it. Closer to the water, salt-laden air speeds up corrosion on fasteners and flashing, so we always use fasteners and panels rated for coastal exposure. After repeated hurricane seasons, more homeowners are moving to standing seam and stone-coated steel because those systems handle wind uplift and heavy rain far better than aged shingles.

Our team has been serving Port Arthur and the greater Beaumont area for years, and we have seen just about every kind of storm damage this part of the Golden Triangle can produce. We know which neighborhoods have historic review requirements, which HOAs want a specific panel profile, and which streets are a challenge to get a truck and trailer down. That local knowledge saves you time and headaches.

Our services in Port Arthur

How a Job Works in Port Arthur

Step 1: You call us at (409) 245-5745 or request a free estimate online. We schedule an on-site assessment at a time that works for you, and we walk the roof, check the attic if accessible, and look at flashing, fasteners, and deck condition. We give you a written scope and a clear price before any work starts, and we never pressure you into a sale.

Step 2: Once you approve, we pull the required roofing permit with the City of Port Arthur (or the applicable jurisdiction) and coordinate any historic district or HOA design review if your home falls under one. We order materials, schedule delivery, and protect your landscaping and driveway. On tight lots, we plan staging carefully so we do not block neighbors or damage fences. Installation typically takes one to three days for a standard ranch, longer for complex roofs or full replacements with deck repairs.

Step 3: When the last panel is set and flashing is sealed, we do a full magnetic sweep for nails, blow off the roof and gutters, and haul away all debris. We walk the finished roof with you, show you the work, and make sure you are satisfied before we call the job complete. We leave your property clean and your roof ready for the next Gulf storm season.

Pricing in Port Arthur depends on the size and pitch of your roof, accessibility, the condition of the decking, and how quickly you need the work done. For a typical single-story ranch, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot and metal roof replacement starts at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, assuming the existing layers meet code. Smaller jobs like metal roof repair or leak repair start at $450, and screw replacement or re-fastening starts at $750. Corrugated panel roofing is the most economical option at $5.50 per square foot, while copper and specialty metals start at $20 per square foot. We always provide a free estimate so you know the real number before we begin. Call (409) 245-5745 to schedule yours.

My house is near the seawall in Port Arthur and the salt air has corroded the fasteners on my metal roof. Can you replace just the screws?
Yes. Screw replacement and re-fastening is a common job for us in the 77640 area, especially on homes close to the ship channel. We use coated, corrosion-resistant fasteners rated for coastal conditions and check the panels and washers at the same time. Starting at $750, it is a cost-effective way to extend the life of a metal roof that is otherwise sound.
A storm just blew through Port Arthur and lifted some panels on my roof. How fast can you get out to inspect and repair?
We offer free storm and wind damage inspections and prioritize active leaks and lifted panels after a storm. Call us at (409) 245-5745 and we will schedule the soonest available slot, often within a day or two depending on call volume. We document the damage for insurance purposes if needed, but we never promise coverage or suggest a deductible can be waived.
What does a metal roof replacement cost for a typical three-bedroom ranch in Port Arthur?
For a standard three-bedroom ranch with a low-pitch roof, most replacements fall between $9 and $12 per square foot installed, depending on whether we need to repair decking, add flashing, or work around skylights and chimneys. That puts a typical job in the low five figures. We give you a firm written estimate after a free on-site inspection, so there are no surprises.
Do I need a permit from the City of Port Arthur to replace my roof, and can you handle that for me?
Yes, a roofing permit is generally required for a full replacement or re-roof in Port Arthur. Permit thresholds and fees are set by the city, and we pull the permit for you as part of the job. If your home is in a historic district or under an HOA, there may be additional design review, and we help coordinate that paperwork so the project stays on schedule.
My neighbor's tree hangs over my property line and drops limbs on my roof. What are my options if I need repairs and my neighbor won't trim the tree?
In Texas, you generally have the right to trim branches that overhang your property line, but you cannot trespass or damage the tree. If fallen limbs have punctured your roof, we can repair the damage and document it for your insurance or for a conversation with your neighbor. For HOA communities in Port Arthur, we can also provide documentation of the damage and the repair scope if you need to file a complaint.
Are you fully insured for roofing work in Port Arthur, and what does that cover?
Yes, we are fully insured with both general liability and workers' compensation coverage. That protects you as the homeowner if anyone is injured on your property or if there is accidental damage during the job.
What maintenance should I do on my metal roof in Port Arthur to prevent leaks during hurricane season?
Twice a year, and especially before hurricane season, walk your yard and look for loose fasteners, lifted panel edges, and debris piles in valleys and against chimneys. Pine straw and oak leaves hold moisture and can back up water. We recommend a professional inspection every two to three years, and we offer free estimates. If you see any sign of a leak, call us at (409) 245-5745 before it spreads.
Why choose us?

Trusted professionals in Beaumont

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Beaumont

All your work handled by qualified professionals in Beaumont

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

239+ Verified Client Reviews in Beaumont

⭐⭐⭐⭐⭐ 4.9/5 · 239 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Beaumont · Response within 24h · No commitment · ☎ (409) 245-5745

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Beaumont ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm